\[\begin{split}\newcommand{\as}{\kw{as}} \newcommand{\Assum}[3]{\kw{Assum}(#1)(#2:#3)} \newcommand{\case}{\kw{case}} \newcommand{\cons}{\textsf{cons}} \newcommand{\consf}{\textsf{consf}} \newcommand{\Def}[4]{\kw{Def}(#1)(#2:=#3:#4)} \newcommand{\emptyf}{\textsf{emptyf}} \newcommand{\End}{\kw{End}} \newcommand{\kwend}{\kw{end}} \newcommand{\even}{\textsf{even}} \newcommand{\evenO}{\textsf{even}_\textsf{O}} \newcommand{\evenS}{\textsf{even}_\textsf{S}} \newcommand{\Fix}{\kw{Fix}} \newcommand{\fix}{\kw{fix}} \newcommand{\for}{\textsf{for}} \newcommand{\forest}{\textsf{forest}} \newcommand{\Functor}{\kw{Functor}} \newcommand{\In}{\kw{in}} \newcommand{\Ind}[4]{\kw{Ind}[#2](#3:=#4)} \newcommand{\ind}[3]{\kw{Ind}~[#1]\left(#2\mathrm{~:=~}#3\right)} \newcommand{\Indp}[5]{\kw{Ind}_{#5}(#1)[#2](#3:=#4)} \newcommand{\Indpstr}[6]{\kw{Ind}_{#5}(#1)[#2](#3:=#4)/{#6}} \newcommand{\injective}{\kw{injective}} \newcommand{\kw}[1]{\textsf{#1}} \newcommand{\length}{\textsf{length}} \newcommand{\letin}[3]{\kw{let}~#1:=#2~\kw{in}~#3} \newcommand{\List}{\textsf{list}} \newcommand{\lra}{\longrightarrow} \newcommand{\Match}{\kw{match}} \newcommand{\Mod}[3]{{\kw{Mod}}({#1}:{#2}\,\zeroone{:={#3}})} \newcommand{\ModA}[2]{{\kw{ModA}}({#1}=={#2})} \newcommand{\ModS}[2]{{\kw{Mod}}({#1}:{#2})} \newcommand{\ModType}[2]{{\kw{ModType}}({#1}:={#2})} \newcommand{\mto}{.\;} \newcommand{\nat}{\textsf{nat}} \newcommand{\Nil}{\textsf{nil}} \newcommand{\nilhl}{\textsf{nil\_hl}} \newcommand{\nO}{\textsf{O}} \newcommand{\node}{\textsf{node}} \newcommand{\nS}{\textsf{S}} \newcommand{\odd}{\textsf{odd}} \newcommand{\oddS}{\textsf{odd}_\textsf{S}} \newcommand{\ovl}[1]{\overline{#1}} \newcommand{\Pair}{\textsf{pair}} \newcommand{\plus}{\mathsf{plus}} \newcommand{\SProp}{\textsf{SProp}} \newcommand{\Prop}{\textsf{Prop}} \newcommand{\return}{\kw{return}} \newcommand{\Set}{\textsf{Set}} \newcommand{\Sort}{\mathcal{S}} \newcommand{\Str}{\textsf{Stream}} \newcommand{\Struct}{\kw{Struct}} \newcommand{\subst}[3]{#1\{#2/#3\}} \newcommand{\tl}{\textsf{tl}} \newcommand{\tree}{\textsf{tree}} \newcommand{\trii}{\triangleright_\iota} \newcommand{\Type}{\textsf{Type}} \newcommand{\WEV}[3]{\mbox{$#1[] \vdash #2 \lra #3$}} \newcommand{\WEVT}[3]{\mbox{$#1[] \vdash #2 \lra$}\\ \mbox{$ #3$}} \newcommand{\WF}[2]{{\mathcal{W\!F}}(#1)[#2]} \newcommand{\WFE}[1]{\WF{E}{#1}} \newcommand{\WFT}[2]{#1[] \vdash {\mathcal{W\!F}}(#2)} \newcommand{\WFTWOLINES}[2]{{\mathcal{W\!F}}\begin{array}{l}(#1)\\\mbox{}[{#2}]\end{array}} \newcommand{\with}{\kw{with}} \newcommand{\WS}[3]{#1[] \vdash #2 <: #3} \newcommand{\WSE}[2]{\WS{E}{#1}{#2}} \newcommand{\WT}[4]{#1[#2] \vdash #3 : #4} \newcommand{\WTE}[3]{\WT{E}{#1}{#2}{#3}} \newcommand{\WTEG}[2]{\WTE{\Gamma}{#1}{#2}} \newcommand{\WTM}[3]{\WT{#1}{}{#2}{#3}} \newcommand{\zeroone}[1]{[{#1}]} \end{split}\]

Extended pattern matching


Cristina Cornes and Hugo Herbelin

This section describes the full form of pattern matching in Coq terms.

Variants and extensions of match

Multiple and nested pattern matching

The basic version of match allows pattern matching on simple patterns. As an extension, multiple nested patterns or disjunction of patterns are allowed, as in ML-like languages (cf. Multiple patterns and Nested patterns).

The extension just acts as a macro that is expanded during parsing into a sequence of match on simple patterns. Especially, a construction defined using the extended match is generally printed under its expanded form (see Printing Matching).

Pattern-matching on boolean values: the if expression

if term as name? return term100? then term else term

For inductive types with exactly two constructors and for pattern matching expressions that do not depend on the arguments of the constructors, it is possible to use a if then else notation. For instance, the definition

Definition not (b:bool) := match b with | true => false | false => true end.
not is defined

can be alternatively written

Definition not (b:bool) := if b then false else true.
not is defined

More generally, for an inductive type with constructors ident1 and ident2, the following terms are equal:

if term0 as name? return term? then term1 else term2

match term0 as name? return term? with | ident1 _* => term1 | ident2 _* => term2 end


Check (fun x (H:{x=0}+{x<>0}) => match H with | left _ => true | right _ => false end).
fun (x : nat) (H : {x = 0} + {x <> 0}) => if H then true else false : forall x : nat, {x = 0} + {x <> 0} -> bool

Notice that the printing uses the if syntax because sumbool is declared as such (see Controlling pretty-printing of match expressions).

Irrefutable patterns: the destructuring let variants

Pattern-matching on terms inhabiting inductive type having only one constructor can be alternatively written using let in constructions. There are two variants of them.

First destructuring let syntax

The expression let ( identi*, ) := term0 in term1 performs case analysis on term0 whose type must be an inductive type with exactly one constructor. The number of variables identi must correspond to the number of arguments of this constructor. Then, in term1, these variables are bound to the arguments of the constructor in term0. For instance, the definition

Definition fst (A B:Set) (H:A * B) := match H with | pair x y => x end.
fst is defined

can be alternatively written

Definition fst (A B:Set) (p:A * B) := let (x, _) := p in x.
fst is defined

Notice that reduction is different from regular let in construction since it happens only if term0 is in constructor form. Otherwise, the reduction is blocked.

The pretty-printing of a definition by matching on a irrefutable pattern can either be done using match or the let construction (see Section Controlling pretty-printing of match expressions).

If term inhabits an inductive type with one constructor C, we have an equivalence between

let (ident₁, …, identₙ) [dep_ret_type] := term in term'


match term [dep_ret_type] with
C ident₁ … identₙ => term'

Second destructuring let syntax

Another destructuring let syntax is available for inductive types with one constructor by giving an arbitrary pattern instead of just a tuple for all the arguments. For example, the preceding example can be written:

Definition fst (A B:Set) (p:A*B) := let 'pair x _ := p in x.
fst is defined

This is useful to match deeper inside tuples and also to use notations for the pattern, as the syntax let p := t in b allows arbitrary patterns to do the deconstruction. For example:

Definition deep_tuple (A:Set) (x:(A*A)*(A*A)) : A*A*A*A := let '((a,b), (c, d)) := x in (a,b,c,d).
deep_tuple is defined
Notation " x 'With' p " := (exist _ x p) (at level 20).
Identifier 'With' now a keyword
Definition proj1_sig' (A:Set) (P:A->Prop) (t:{ x:A | P x }) : A := let 'x With p := t in x.
proj1_sig' is defined

When printing definitions which are written using this construct it takes precedence over let printing directives for the datatype under consideration (see Section Controlling pretty-printing of match expressions).

Controlling pretty-printing of match expressions

The following commands give some control over the pretty-printing of match expressions.

Printing nested patterns

Flag Printing Matching

The Calculus of Inductive Constructions knows pattern matching only over simple patterns. It is however convenient to re-factorize nested pattern matching into a single pattern matching over a nested pattern.

When this flag is on (default), Coq’s printer tries to do such limited re-factorization. Turning it off tells Coq to print only simple pattern matching problems in the same way as the Coq kernel handles them.

Factorization of clauses with same right-hand side

Flag Printing Factorizable Match Patterns

When several patterns share the same right-hand side, it is additionally possible to share the clauses using disjunctive patterns. Assuming that the printing matching mode is on, this flag (on by default) tells Coq's printer to try to do this kind of factorization.

Use of a default clause

Flag Printing Allow Match Default Clause

When several patterns share the same right-hand side which do not depend on the arguments of the patterns, yet an extra factorization is possible: the disjunction of patterns can be replaced with a _ default clause. Assuming that the printing matching mode and the factorization mode are on, this flag (on by default) tells Coq's printer to use a default clause when relevant.

Printing of wildcard patterns

Flag Printing Wildcard

Some variables in a pattern may not occur in the right-hand side of the pattern matching clause. When this flag is on (default), the variables having no occurrences in the right-hand side of the pattern matching clause are just printed using the wildcard symbol “_”.

Printing of the elimination predicate

Flag Printing Synth

In most of the cases, the type of the result of a matched term is mechanically synthesizable. Especially, if the result type does not depend of the matched term. When this flag is on (default), the result type is not printed when Coq knows that it can re- synthesize it.

Printing matching on irrefutable patterns

If an inductive type has just one constructor, pattern matching can be written using the first destructuring let syntax.

Table Printing Let qualid

Specifies a set of qualids for which pattern matching is displayed using a let expression. Note that this only applies to pattern matching instances entered with match. It doesn't affect pattern matching explicitly entered with a destructuring let. Use the Add and Remove commands to update this set.

Printing matching on booleans

If an inductive type is isomorphic to the boolean type, pattern matching can be written using ifthenelse …. This table controls which types are written this way:

Table Printing If qualid

Specifies a set of qualids for which pattern matching is displayed using ifthenelse …. Use the Add and Remove commands to update this set.

This example emphasizes what the printing settings offer.


Definition snd (A B:Set) (H:A * B) := match H with | pair x y => y end.
snd is defined
Test Printing Let for prod.
Cases on elements of prod are printed using a `let' form
Print snd.
snd = fun (A B : Set) (H : A * B) => let (_, y) := H in y : forall A B : Set, A * B -> B Arguments snd (_ _)%type_scope
Remove Printing Let prod.
Unset Printing Synth.
Unset Printing Wildcard.
Print snd.
snd = fun (A B : Set) (H : A * B) => match H return B with | (x, y) => y end : forall A B : Set, A * B -> B Arguments snd (_ _)%type_scope


The full syntax of match is presented in Definition by cases: match. Identifiers in patterns are either constructor names or variables. Any identifier that is not the constructor of an inductive or co-inductive type is considered to be a variable. A variable name cannot occur more than once in a given pattern. It is recommended to start variable names by a lowercase letter.

If a pattern has the form c x where c is a constructor symbol and x is a linear vector of (distinct) variables, it is called simple: it is the kind of pattern recognized by the basic version of match. On the opposite, if it is a variable x or has the form c p with p not only made of variables, the pattern is called nested.

A variable pattern matches any value, and the identifier is bound to that value. The pattern “_” (called “don't care” or “wildcard” symbol) also matches any value, but does not bind anything. It may occur an arbitrary number of times in a pattern. Alias patterns written (pattern as ident) are also accepted. This pattern matches the same values as pattern does and ident is bound to the matched value. A pattern of the form pattern | pattern is called disjunctive. A list of patterns separated with commas is also considered as a pattern and is called multiple pattern. However multiple patterns can only occur at the root of pattern matching equations. Disjunctions of multiple patterns are allowed though.

Since extended match expressions are compiled into the primitive ones, the expressiveness of the theory remains the same. Once parsing has finished only simple patterns remain. The original nesting of the match expressions is recovered at printing time. An easy way to see the result of the expansion is to toggle off the nesting performed at printing (use here Printing Matching), then by printing the term with Print if the term is a constant, or using the command Check.

The extended match still accepts an optional elimination predicate given after the keyword return. Given a pattern matching expression, if all the right-hand-sides of => have the same type, then this type can be sometimes synthesized, and so we can omit the return part. Otherwise the predicate after return has to be provided, like for the basicmatch.

Let us illustrate through examples the different aspects of extended pattern matching. Consider for example the function that computes the maximum of two natural numbers. We can write it in primitive syntax by:

Fixpoint max (n m:nat) {struct m} : nat :=   match n with   | O => m   | S n' => match m with             | O => S n'             | S m' => S (max n' m')             end   end.
max is defined max is recursively defined (guarded on 2nd argument)

Multiple patterns

Using multiple patterns in the definition of max lets us write:

Fixpoint max (n m:nat) {struct m} : nat :=     match n, m with     | O, _ => m     | S n', O => S n'     | S n', S m' => S (max n' m')     end.
max is defined max is recursively defined (guarded on 2nd argument)

which will be compiled into the previous form.

The pattern matching compilation strategy examines patterns from left to right. A match expression is generated only when there is at least one constructor in the column of patterns. E.g. the following example does not build a match expression.

Check (fun x:nat => match x return nat with                     | y => y                     end).
fun x : nat => x : nat -> nat

Aliasing subpatterns

We can also use as ident to associate a name to a sub-pattern:

Fixpoint max (n m:nat) {struct n} : nat :=   match n, m with   | O, _ => m   | S n' as p, O => p   | S n', S m' => S (max n' m')   end.
max is defined max is recursively defined (guarded on 1st argument)

Nested patterns

Here is now an example of nested patterns:

Fixpoint even (n:nat) : bool :=   match n with   | O => true   | S O => false   | S (S n') => even n'   end.
even is defined even is recursively defined (guarded on 1st argument)

This is compiled into:

Unset Printing Matching.
Print even.
even = fix even (n : nat) : bool := match n with | 0 => true | S n0 => match n0 with | 0 => false | S n' => even n' end end : nat -> bool Arguments even _%nat_scope
Set Printing Matching.

In the previous examples patterns do not conflict with, but sometimes it is comfortable to write patterns that admit a non trivial superposition. Consider the boolean function lef that given two natural numbers yields true if the first one is less or equal than the second one and false otherwise. We can write it as follows:

Fixpoint lef (n m:nat) {struct m} : bool :=   match n, m with   | O, x => true   | x, O => false   | S n, S m => lef n m   end.
lef is defined lef is recursively defined (guarded on 2nd argument)

Note that the first and the second multiple pattern overlap because the couple of values O O matches both. Thus, what is the result of the function on those values? To eliminate ambiguity we use the textual priority rule: we consider patterns to be ordered from top to bottom. A value is matched by the pattern at the ith row if and only if it is not matched by some pattern from a previous row. Thus in the example, O O is matched by the first pattern, and so (lef O O) yields true.

Another way to write this function is:

Fixpoint lef (n m:nat) {struct m} : bool :=   match n, m with   | O, x => true   | S n, S m => lef n m   | _, _ => false   end.
lef is defined lef is recursively defined (guarded on 2nd argument)

Here the last pattern superposes with the first two. Because of the priority rule, the last pattern will be used only for values that do not match neither the first nor the second one.

Terms with useless patterns are not accepted by the system. Here is an example:

Fail Check (fun x:nat =>               match x with               | O => true               | S _ => false               | x => true               end).
The command has indeed failed with message: Pattern "x" is redundant in this clause.

Disjunctive patterns

Multiple patterns that share the same right-hand-side can be factorized using the notation pattern+,+|. For instance, max can be rewritten as follows:

Fixpoint max (n m:nat) {struct m} : nat :=   match n, m with   | S n', S m' => S (max n' m')   | 0, p | p, 0 => p   end.
max is defined max is recursively defined (guarded on 2nd argument)

Similarly, factorization of (not necessarily multiple) patterns that share the same variables is possible by using the notation pattern+|. Here is an example:

Definition filter_2_4 (n:nat) : nat :=   match n with   | 2 as m | 4 as m => m   | _ => 0   end.
filter_2_4 is defined

Nested disjunctive patterns are allowed, inside parentheses, with the notation (pattern+|), as in:

Definition filter_some_square_corners (p:nat*nat) : nat*nat :=   match p with   | ((2 as m | 4 as m), (3 as n | 5 as n)) => (m,n)   | _ => (0,0)   end.
filter_some_square_corners is defined

About patterns of parametric types

Parameters in patterns

When matching objects of a parametric type, parameters do not bind in patterns. They must be substituted by “_”. Consider for example the type of polymorphic lists:

Inductive List (A:Set) : Set := | nil : List A | cons : A -> List A -> List A.
List is defined List_rect is defined List_ind is defined List_rec is defined List_sind is defined

We can check the function tail:

Check   (fun l:List nat =>      match l with      | nil _ => nil nat      | cons _ _ l' => l'      end).
fun l : List nat => match l with | nil _ => nil nat | cons _ _ l' => l' end : List nat -> List nat

When we use parameters in patterns there is an error message:

Fail Check   (fun l:List nat =>      match l with      | nil A => nil nat      | cons A _ l' => l'      end).
The command has indeed failed with message: The parameters do not bind in patterns; they must be replaced by '_'.
Flag Asymmetric Patterns

This flag (off by default) removes parameters from constructors in patterns:

Set Asymmetric Patterns.
Check (fun l:List nat =>   match l with   | nil => nil _   | cons _ l' => l'   end).
fun l : List nat => match l with | @nil _ => nil nat | @cons _ _ l' => l' end : List nat -> List nat
Unset Asymmetric Patterns.

Implicit arguments in patterns

By default, implicit arguments are omitted in patterns. So we write:

Arguments nil {A}.
Arguments cons [A] _ _.
Check   (fun l:List nat =>      match l with      | nil => nil      | cons _ l' => l'      end).
fun l : List nat => match l with | nil => nil | cons _ l' => l' end : List nat -> List nat

But the possibility to use all the arguments is given by “@” implicit explicitations (as for terms, see Explicit applications).

Check   (fun l:List nat =>      match l with      | @nil _ => @nil nat      | @cons _ _ l' => l'      end).
fun l : List nat => match l with | nil => nil | cons _ l' => l' end : List nat -> List nat

Matching objects of dependent types

The previous examples illustrate pattern matching on objects of non- dependent types, but we can also use the expansion strategy to destructure objects of dependent types. Consider the type listn of lists of a certain length:

Inductive listn : nat -> Set := | niln : listn 0 | consn : forall n:nat, nat -> listn n -> listn (S n).
listn is defined listn_rect is defined listn_ind is defined listn_rec is defined listn_sind is defined

Understanding dependencies in patterns

We can define the function length over listn by:

Definition length (n:nat) (l:listn n) := n.

Just for illustrating pattern matching, we can define it by case analysis:

Definition length (n:nat) (l:listn n) :=   match l with   | niln => 0   | consn n _ _ => S n   end.
length is defined

We can understand the meaning of this definition using the same notions of usual pattern matching.

When the elimination predicate must be provided

Dependent pattern matching

The examples given so far do not need an explicit elimination predicate because all the right hand sides have the same type and Coq succeeds to synthesize it. Unfortunately when dealing with dependent patterns it often happens that we need to write cases where the types of the right hand sides are different instances of the elimination predicate. The function concat for listn is an example where the branches have different types and we need to provide the elimination predicate:

Fixpoint concat (n:nat) (l:listn n) (m:nat) (l':listn m) {struct l} :  listn (n + m) :=   match l in listn n return listn (n + m) with   | niln => l'   | consn n' a y => consn (n' + m) a (concat n' y m l')   end.
concat is defined concat is recursively defined (guarded on 2nd argument)
Reset concat.

The elimination predicate is fun (n:nat) (l:listn n) => listn (n+m). In general if m has type (I q1 qr t1 ts) where q1, , qr are parameters, the elimination predicate should be of the form fun y1 ys x : (I q1 qr y1 ys ) => Q.

In the concrete syntax, it should be written : match m as x in (I _ _ y1 ys) return Q with end. The variables which appear in the in and as clause are new and bounded in the property Q in the return clause. The parameters of the inductive definitions should not be mentioned and are replaced by _.

Multiple dependent pattern matching

Recall that a list of patterns is also a pattern. So, when we destructure several terms at the same time and the branches have different types we need to provide the elimination predicate for this multiple pattern. It is done using the same scheme: each term may be associated to an as clause and an in clause in order to introduce a dependent product.

For example, an equivalent definition for concat (even though the matching on the second term is trivial) would have been:

Fixpoint concat (n:nat) (l:listn n) (m:nat) (l':listn m) {struct l} :  listn (n + m) :=   match l in listn n, l' return listn (n + m) with   | niln, x => x   | consn n' a y, x => consn (n' + m) a (concat n' y m x)   end.
concat is defined concat is recursively defined (guarded on 2nd argument)

Even without real matching over the second term, this construction can be used to keep types linked. If a and b are two listn of the same length, by writing

Check (fun n (a b: listn n) =>  match a, b with  | niln, b0 => tt  | consn n' a y, bS => tt  end).
fun (n : nat) (a _ : listn n) => match a with | niln | _ => tt end : forall n : nat, listn n -> listn n -> unit

we have a copy of b in type listn 0 resp. listn (S n').

Patterns in in

If the type of the matched term is more precise than an inductive applied to variables, arguments of the inductive in the in branch can be more complicated patterns than a variable.

Moreover, constructors whose types do not follow the same pattern will become impossible branches. In an impossible branch, you can answer anything but False_rect unit has the advantage to be subterm of anything.

To be concrete: the tail function can be written:

Definition tail n (v: listn (S n)) :=   match v in listn (S m) return listn m with   | niln => False_rect unit   | consn n' a y => y   end.
tail is defined

and tail n v will be subterm of v.

Using pattern matching to write proofs

In all the previous examples the elimination predicate does not depend on the object(s) matched. But it may depend and the typical case is when we write a proof by induction or a function that yields an object of a dependent type. An example of a proof written using match is given in the description of the tactic refine.

For example, we can write the function buildlist that given a natural number n builds a list of length n containing zeros as follows:

Fixpoint buildlist (n:nat) : listn n :=   match n return listn n with   | O => niln   | S n => consn n 0 (buildlist n)   end.
buildlist is defined buildlist is recursively defined (guarded on 1st argument)

We can also use multiple patterns. Consider the following definition of the predicate less-equal Le:

Inductive LE : nat -> nat -> Prop :=   | LEO : forall n:nat, LE 0 n   | LES : forall n m:nat, LE n m -> LE (S n) (S m).
LE is defined LE_ind is defined LE_sind is defined

We can use multiple patterns to write the proof of the lemma forall (n m:nat), (LE n m) \/ (LE m n):

Fixpoint dec (n m:nat) {struct n} : LE n m \/ LE m n :=   match n, m return LE n m \/ LE m n with   | O, x => or_introl (LE x 0) (LEO x)   | x, O => or_intror (LE x 0) (LEO x)   | S n as n', S m as m' =>       match dec n m with       | or_introl h => or_introl (LE m' n') (LES n m h)       | or_intror h => or_intror (LE n' m') (LES m n h)       end   end.
dec is defined dec is recursively defined (guarded on 1st argument)

In the example of dec, the first match is dependent while the second is not.

The user can also use match in combination with the tactic refine to build incomplete proofs beginning with a match construction.

Pattern-matching on inductive objects involving local definitions

If local definitions occur in the type of a constructor, then there are two ways to match on this constructor. Either the local definitions are skipped and matching is done only on the true arguments of the constructors, or the bindings for local definitions can also be caught in the matching.


Inductive list : nat -> Set := | nil : list 0 | cons : forall n:nat, let m := (2 * n) in list m -> list (S (S m)).
list is defined list_rect is defined list_ind is defined list_rec is defined list_sind is defined

In the next example, the local definition is not caught.

Fixpoint length n (l:list n) {struct l} : nat :=   match l with   | nil => 0   | cons n l0 => S (length (2 * n) l0)   end.
length is defined length is recursively defined (guarded on 2nd argument)

But in this example, it is.

Fixpoint length' n (l:list n) {struct l} : nat :=   match l with   | nil => 0   | @cons _ m l0 => S (length' m l0)   end.
length' is defined length' is recursively defined (guarded on 2nd argument)


For a given matching clause, either none of the local definitions or all of them can be caught.


You can only catch let bindings in mode where you bind all variables and so you have to use @ syntax.


this feature is incoherent with the fact that parameters cannot be caught and consequently is somehow hidden. For example, there is no mention of it in error messages.

Pattern-matching and coercions

If a mismatch occurs between the expected type of a pattern and its actual type, a coercion made from constructors is sought. If such a coercion can be found, it is automatically inserted around the pattern.


Inductive I : Set :=   | C1 : nat -> I   | C2 : I -> I.
I is defined I_rect is defined I_ind is defined I_rec is defined I_sind is defined
Coercion C1 : nat >-> I.
C1 is now a coercion
Check (fun x => match x with                 | C2 O => 0                 | _ => 0                 end).
fun x : I => match x with | C1 _ | _ => 0 end : I -> nat

When does the expansion strategy fail?

The strategy works very like in ML languages when treating patterns of non-dependent types. But there are new cases of failure that are due to the presence of dependencies.

The error messages of the current implementation may be sometimes confusing. When the tactic fails because patterns are somehow incorrect then error messages refer to the initial expression. But the strategy may succeed to build an expression whose sub-expressions are well typed when the whole expression is not. In this situation the message makes reference to the expanded expression. We encourage users, when they have patterns with the same outer constructor in different equations, to name the variable patterns in the same positions with the same name. E.g. to write (cons n O x) => e1 and (cons n _ x) => e2 instead of (cons n O x) => e1 and (cons n' _ x') => e2. This helps to maintain certain name correspondence between the generated expression and the original.

Here is a summary of the error messages corresponding to each situation:

Error The constructor ident expects num arguments.
Error The variable ident is bound several times in pattern term
Error Found a constructor of inductive type term while a constructor of term is expected

Patterns are incorrect (because constructors are not applied to the correct number of arguments, because they are not linear or they are wrongly typed).

Error Non exhaustive pattern matching.

The pattern matching is not exhaustive.

Error The elimination predicate term should be of arity num (for non dependent case) or num (for dependent case).

The elimination predicate provided to match has not the expected arity.

Error Unable to infer a match predicate
Error Either there is a type incompatibility or the problem involves dependencies.

There is a type mismatch between the different branches. The user should provide an elimination predicate.